# it wouldn't be tarck without a dyno thread **URL:** \ **Category:** Bikes\ **Created:** [August 17, 2018, 11:13pm UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747 "2018-08-17T23:13:35Z")\ **Posts on this page:** 20\ **Page:** 103
**Author:** ![iwillbe](https://static.tarck.cc/user_avatar/tarck.cc/iwillbe/32/1896_2.png) [@iwillbe](https://tarck.cc/u/iwillbe)\ **Post date:** [February 15, 2022, 4:13am UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2049 "2022-02-15T04:13:45Z")
How’s the output off the front lamps capacitor? Any other supply in the line out to the rear? ---
**Author:** ![Dr\_Jart\_Attack\_PhD](https://static.tarck.cc/user_avatar/tarck.cc/dr_jart_attack_phd/32/16324_2.png) [@Dr\_Jart\_Attack\_PhD](https://tarck.cc/u/Dr_Jart_Attack_PhD)\ **Post date:** [February 15, 2022, 4:49am UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2050 "2022-02-15T04:49:25Z")
Can’t speak for rusty, but I’m running two taillights (Toplight Line Plus and Secula) and one headlight (Cyo Premium) on a bike with 26inch wheels and Shimano hub. I have not noticed any issues with the front light, and honestly I think it lights up faster than the Cyo on my bike with the Sanyo hub and one taillight. I think the only “issue” I’ve had is that the Secula stand light stays on a lot longer than the Toplight but I’ve just imagined that is because the Secula only has one LED If I didn’t hate wiring work I’d think about adding a third taillight in the saddle like rusty… ---
**Author:** ![Rusty\_Piton](https://static.tarck.cc/user_avatar/tarck.cc/rusty_piton/32/579_2.png) [@Rusty\_Piton](https://tarck.cc/u/Rusty_Piton)\ **Post date:** [February 15, 2022, 4:43pm UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2051 "2022-02-15T16:43:41Z")
Yeah, everything works perfectly. ---
**Author:** ![Shiny\_squid\_green](https://static.tarck.cc/user_avatar/tarck.cc/shiny_squid_green/32/1981_2.png) [@Shiny\_squid\_green](https://tarck.cc/u/Shiny_squid_green)\ **Post date:** [February 16, 2022, 4:27pm UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2052 "2022-02-16T16:27:56Z")
2 questions; 1. Does the Shimano lego brick work on a Son hub as well? Not really stoked on wheel removal and 2 loose clippies. 2. Any way to fit a 15x100 Son hub to a qr? Feel like I remember these being answered, but can’t recall the answers. ---
**Author:** ![Andrew\_Andeson](https://static.tarck.cc/user_avatar/tarck.cc/andrew_andeson/32/144359_2.png) [@Andrew\_Andeson](https://tarck.cc/u/Andrew_Andeson)\ **Post date:** [February 16, 2022, 4:40pm UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2053 "2022-02-16T16:40:19Z")
1. It doesn’t However the two loose clippies in practice are easy to deal with And son have a kit to convert them to coax pluggie if that is your desire I have both setups on different bikes and they are fine. ---
**Author:** ![drwelby](https://static.tarck.cc/user_avatar/tarck.cc/drwelby/32/142_2.png) [@drwelby](https://tarck.cc/u/drwelby)\ **Post date:** [February 16, 2022, 4:43pm UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2054 "2022-02-16T16:43:17Z")
It does, you just have to bulk up one side to take up the slack ![image](https://cdn.tarck.cc/original/3X/a/e/aebc720c80bda8021ddd28d2bf49adb3db69c550.jpeg) As for TA → QR, there are adaptors. ---
**Author:** ![Andrew\_Andeson](https://static.tarck.cc/user_avatar/tarck.cc/andrew_andeson/32/144359_2.png) [@Andrew\_Andeson](https://tarck.cc/u/Andrew_Andeson)\ **Post date:** [February 16, 2022, 4:43pm UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2055 "2022-02-16T16:43:47Z")
Oh wow 😲 what is used for bulking? ---
**Author:** ![drwelby](https://static.tarck.cc/user_avatar/tarck.cc/drwelby/32/142_2.png) [@drwelby](https://tarck.cc/u/drwelby)\ **Post date:** [February 16, 2022, 4:45pm UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2056 "2022-02-16T16:45:01Z")
I’ve heard electrical tape and sugru ---
**Author:** ![LASER\_BEIGE](https://static.tarck.cc/user_avatar/tarck.cc/laser_beige/32/152421_2.png) [@LASER\_BEIGE](https://tarck.cc/u/LASER_BEIGE)\ **Post date:** [February 16, 2022, 5:07pm UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2057 "2022-02-16T17:07:36Z")
Shimano Lego is a kludge What are you doing to remove that wheel so often that you need this? Fwiw, I have a drawing of a Schmidt lego I tried to 3d print but it didn’t work ---
**Author:** ![Shiny\_squid\_green](https://static.tarck.cc/user_avatar/tarck.cc/shiny_squid_green/32/1981_2.png) [@Shiny\_squid\_green](https://tarck.cc/u/Shiny_squid_green)\ **Post date:** [February 16, 2022, 5:31pm UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2058 "2022-02-16T17:31:03Z")
I don’t, just saw one and the dither machine between my ears started revving up. ---
**Author:** ![iwillbe](https://static.tarck.cc/user_avatar/tarck.cc/iwillbe/32/1896_2.png) [@iwillbe](https://tarck.cc/u/iwillbe)\ **Post date:** [February 16, 2022, 5:35pm UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2059 "2022-02-16T17:35:50Z")
@jeffro went absolutely hog wild with this a few years ago, right? custom connector plates in the dropout? Talbot in the UK has done conductive paint rather than wiring I think @Andrew_Squirrel had a whole lot of elegant applications of commonly available cabling and cable interface stuff going on with their various bikes. I, too, get a-dithering when this comes up. 4 bikes wtih dynos and counting… ---
**Author:** ![crowding](https://static.tarck.cc/user_avatar/tarck.cc/crowding/32/37821_2.png) [@crowding](https://tarck.cc/u/crowding)\ **Post date:** [February 16, 2022, 9:11pm UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2060 "2022-02-16T21:11:49Z")
there were some breezers (?) with SON hubs set up to route power through the axle ends to a conductive plate in the dropout. iirc jan heine was involved somehow. Some tarckers got the wheels on closeout ---
**Author:** ![earwig](https://static.tarck.cc/user_avatar/tarck.cc/earwig/32/15729_2.png) [@earwig](https://tarck.cc/u/earwig)\ **Post date:** [February 16, 2022, 9:22pm UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2061 "2022-02-16T21:22:47Z")
Yeah, SON sells a special hub and conductive dropout plates for _your framebuilder_ to build into a fork. As I remember it, Wiggle blew out a bunch of those hubs a few years ago and various folks here snapped them up and dithered together out ways to create the electrical connection at the dropouts without building new forks. ---
**Author:** ![Shiny\_squid\_green](https://static.tarck.cc/user_avatar/tarck.cc/shiny_squid_green/32/1981_2.png) [@Shiny\_squid\_green](https://tarck.cc/u/Shiny_squid_green)\ **Post date:** [February 16, 2022, 9:37pm UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2062 "2022-02-16T21:37:54Z")
Yeah, I was working for Canyon at the time and they were definitely extra stock for the weird urban bike they made and didn’t sell very well. ---
**Author:** ![Shiny\_squid\_green](https://static.tarck.cc/user_avatar/tarck.cc/shiny_squid_green/32/1981_2.png) [@Shiny\_squid\_green](https://tarck.cc/u/Shiny_squid_green)\ **Post date:** [February 16, 2022, 9:39pm UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2063 "2022-02-16T21:39:01Z")
Dis one > **[Review: Canyon Commuter (Urban) Bikes](https://magazine.bikesoup.com/review-canyon-commuter-urban-bikes/)** > > I couldn't imagine wanting anything more in terms of practicality. I happen to think the Canyon Commuter (and Urban) looks the nuts too... ---
**Author:** ![drwelby](https://static.tarck.cc/user_avatar/tarck.cc/drwelby/32/142_2.png) [@drwelby](https://tarck.cc/u/drwelby)\ **Post date:** [February 16, 2022, 9:59pm UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2064 "2022-02-16T21:59:25Z")
[https://nabendynamo.de/en/products/sl/](https://nabendynamo.de/en/products/sl/) Standard SON model, not a hienyism ---
**Author:** ![LASER\_BEIGE](https://static.tarck.cc/user_avatar/tarck.cc/laser_beige/32/152421_2.png) [@LASER\_BEIGE](https://tarck.cc/u/LASER_BEIGE)\ **Post date:** [February 16, 2022, 10:11pm UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2065 "2022-02-16T22:11:50Z")
Also I think paragon makes the fork ends ---
**Author:** ![JUGE\_FREDD](https://static.tarck.cc/user_avatar/tarck.cc/juge_fredd/32/34623_2.png) [@JUGE\_FREDD](https://tarck.cc/u/JUGE_FREDD)\ **Post date:** [February 16, 2022, 10:34pm UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2066 "2022-02-16T22:34:07Z")
![image](https://cdn.tarck.cc/original/3X/7/e/7ed1bd8cd1d94e64e8ca1ef793810fa68f35dd91.jpeg) ---
**Author:** ![Shiny\_squid\_green](https://static.tarck.cc/user_avatar/tarck.cc/shiny_squid_green/32/1981_2.png) [@Shiny\_squid\_green](https://tarck.cc/u/Shiny_squid_green)\ **Post date:** [February 16, 2022, 10:49pm UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2067 "2022-02-16T22:49:02Z")
Some dude on the BCC slack was killing it with bad Valentine’s bike photoshops ---
**Author:** ![adem](https://static.tarck.cc/user_avatar/tarck.cc/adem/32/2176_2.png) [@adem](https://tarck.cc/u/adem)\ **Post date:** [February 17, 2022, 12:18am UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2068 "2022-02-17T00:18:10Z")
![image-1](https://cdn.tarck.cc/original/3X/c/1/c1f469d97555a2ce488b503c8caaa5ff6939b2ca.jpeg) [Previous page](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747.md?page=102) [Next page](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747.md?page=104)