# it wouldn't be tarck without a dyno thread
**URL:** https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747
**Category:** Bikes
**Created:** [August 17, 2018, 11:13pm UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747 "2018-08-17T23:13:35Z")
**Posts on this page:** 20
**Page:** 112
### Author:  [@Emor\_please](https://tarck.cc/u/Emor_please)
#### Post date: [August 19, 2022, 1:41am UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2231 "2022-08-19T01:41:41Z")
got my new wheel with shimano electro hub to replace my very, very squeaky SP hub.
it’s nice to not have a ton of extra resistance when I ride but, HOLY FUCK does the shimano have a ton of vibration, wowzers. way more than SP
also, I had the shop (fancy expensive coolbro shop) do the tape job and I think they fucked it up. i got the tire mounted with a floor pump but am getting a lot of leaking around the valve. that’s a tape fuckup right?
should I take it back to the shop or just tape it myself?
---
### Author:  [@Perlhammered](https://tarck.cc/u/Perlhammered)
#### Post date: [September 3, 2022, 4:09pm UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2232 "2022-09-03T16:09:58Z")
Other than it being way more expensive, SON rackmount rear lights appreciably better, if at all, than a Secula?
Have heard rumor that they’re incompatible with IQ-x, fact or fiction?
---
### Author:  [@Emor\_please](https://tarck.cc/u/Emor_please)
#### Post date: [September 3, 2022, 6:01pm UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2233 "2022-09-03T18:01:42Z")
my unscientific observation is that bigger lights work better for visibility. I don’t know if I’ve ever ridden behind on those jawns tho. anything is better than the various bare LED bulb lights out there
---
### Author:  [@Perlhammered](https://tarck.cc/u/Perlhammered)
#### Post date: [September 3, 2022, 6:14pm UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2234 "2022-09-03T18:14:16Z")
Yeah, I very well may be getting vanity in the way of function, but saw this on IG was inspired:
I would say ignore the fork, but also don’t
---
### Author:  [@shane.rrr](https://tarck.cc/u/shane.rrr)
#### Post date: [September 3, 2022, 6:55pm UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2235 "2022-09-03T18:55:51Z")
This feels like it should have a supreme logo on it
---
### Author:  [@asterisk](https://tarck.cc/u/asterisk)
#### Post date: [September 3, 2022, 9:07pm UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2236 "2022-09-03T21:07:19Z")
Those carbon fenders tho
---
### Author:  [@paris](https://tarck.cc/u/paris)
#### Post date: [September 4, 2022, 1:02am UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2237 "2022-09-04T01:02:31Z")
I was thinking the fork should be turned 180 degrees and the light should be a glowing meatball stuck on the tines.
---
### Author:  [@Shamp](https://tarck.cc/u/Shamp)
#### Post date: [September 4, 2022, 3:37am UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2238 "2022-09-04T03:37:01Z")
SON rear light related, doesn’t someone make a fender mount bracket for these? My Secula is super janky
---
### Author:  [@jame5on](https://tarck.cc/u/jame5on)
#### Post date: [September 4, 2022, 8:49am UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2239 "2022-09-04T08:49:59Z")
> **[AT Saddlelite taillight mount | Velo Lumino](https://www.velolumino.com/product/at-saddlelite-taillight-mount/39?cp=true&sa=true&sbp=false&q=false)**
>
> The AT Saddlite taillight mount allows you to securely and discreetly mount the popular B&M Toplight Line Small, or SON Rear Light directly to your saddle rails. The result is a super-lightweight (mount weighs only 13g), super-strong and stealthy...
---
### Author:  [@Bootus](https://tarck.cc/u/Bootus)
#### Post date: [September 4, 2022, 1:24pm UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2240 "2022-09-04T13:24:01Z")
> **[Fender-Mounted Light Bracket](https://velo-orange.com/collections/lighting/products/blinky-light-bracket)**
>
> These E3 tail light brackets are cut from 5052 aluminum and anodized. They are designed for E3 tail lights but also fit popular blinky rear lights.
---
### Author:  [@Shamp](https://tarck.cc/u/Shamp)
#### Post date: [September 4, 2022, 3:41pm UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2241 "2022-09-04T15:41:29Z")
I now see I wasn’t clear, I mean mounting to the fender mount on the drop out.
This is what I was thinking of
> **[Supernova E3/Schmidt SON tail light bracket - Seat stay mount for left and...](https://framebuildersupply.com/products/supernova-e3-schmidt-son-tail-light-bracket-seat-stay-mount-black-and-silver)**
>
> Supernova E3/Schmidt SON tail light bracket - Seat stay mount - silver. Busch & Müller, 50mm European standard. Integrated lighting system. Right and left mount versions
But I’ve seen nicer one before and just can’t remember where
---
### Author:  [@Andrew\_Andeson](https://tarck.cc/u/Andrew_Andeson)
#### Post date: [September 4, 2022, 10:06pm UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2242 "2022-09-04T22:06:54Z")
Fairlight have one that they 3d print
Spendy though and it can break if your kid knocks your bike over etc
> **[Dynamo Rear Light Mount – Non Drive Side](https://fairlightcycles.com/product/dynamo-rear-light-mount-non-drive-side-retail-stock/)**
>
> £16.67 excluding VAT for non EU customers. A 3D printed dynamo light bracket. Supplied with brass nuts, wire clip and bolt. Bolts to fit the light are supplied with the SON rear light. Suitable for…
I prefer light mounts that are better protected.off the rear brake bridge is my location of choice right now.
---
### Author:  [@jame5on](https://tarck.cc/u/jame5on)
#### Post date: [September 4, 2022, 10:24pm UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2243 "2022-09-04T22:24:39Z")
> **[Trek 1120 Rear Light Bracket | Trek Bikes](https://www.trekbikes.com/us/en_US/equipment/bike-accessories/bike-racks/trek-1120-rear-light-bracket/p/27861/?gclid=Cj0KCQjwmdGYBhDRARIsABmSEeMUICuixedMA9cet6kQNIf4UaTPCY4QniRGM5WGJI3W2CBFytOM18kaAqTcEALw_wcB)**
>
> Enhance your cycling experience with Trek 1120 Rack Parts. Shop now!
---
### Author:  [@jame5on](https://tarck.cc/u/jame5on)
#### Post date: [September 4, 2022, 10:28pm UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2244 "2022-09-04T22:28:13Z")
Why are they bolting the brake mount in place?!
---
### Author:  [@JUGE\_FREDD](https://tarck.cc/u/JUGE_FREDD)
#### Post date: [September 4, 2022, 10:31pm UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2245 "2022-09-04T22:31:48Z")
> [@Shamp](#):
>
> SON rear light related, doesn’t someone make a fender mount bracket for these?
they make fender-specific versions with radius profiles for different widths [https://www.bike24.com/p2249978.html](https://www.bike24.com/p2249978.html)
---
### Author:  [@jame5on](https://tarck.cc/u/jame5on)
#### Post date: [September 4, 2022, 10:41pm UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2246 "2022-09-04T22:41:33Z")
With the euro at par those prices are ridiculous!
---
### Author:  [@Andrew\_Andeson](https://tarck.cc/u/Andrew_Andeson)
#### Post date: [September 4, 2022, 10:57pm UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2247 "2022-09-04T22:57:16Z")
Pardon the dirty bike
I did this for $0 with a stainless rack strap
Unlike fender mounting, it stays put when you remove the fenders
---
### Author:  [@Shamp](https://tarck.cc/u/Shamp)
#### Post date: [September 5, 2022, 1:41am UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2248 "2022-09-05T01:41:36Z")
> [@Andrew\_Andeson](#):
>
> Fairlight have one that they 3d print
>
> Spendy though and it can break if your kid knocks your bike over etc
>
> I prefer light mounts that are better protected.off the rear brake bridge is my location of choice right now.
I’d rather just 3d print it on my own but yeah that looks flimsy as hell
---
### Author:  [@dotMR](https://tarck.cc/u/dotMR)
#### Post date: [September 5, 2022, 7:01am UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2249 "2022-09-05T07:01:38Z")
> [@Andrew\_Andeson](#):
>
> Spendy though and it can break if your kid knocks your bike over etc
My friend broke his day 1 on his new secan.
---
### Author:  [@Bearpants](https://tarck.cc/u/Bearpants)
#### Post date: [September 5, 2022, 7:26am UTC](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747/2250 "2022-09-05T07:26:29Z")
If I was feeling extra dithery, would it be a great or terrible idea to try and find a way to route my dynamo cable to my rear light through the cfr696 and drill a hole somewhere in the seatpost to let the cable out just behind the light?
[Previous page](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747.md?page=111)
[Next page](https://tarck.cc/t/it-wouldnt-be-tarck-without-a-dyno-thread/21747.md?page=113)