# Tarck Arts and Carfts. Post your home-built bikey stuff.

**URL:** https://tarck.cc/t/tarck-arts-and-carfts-post-your-home-built-bikey-stuff/19528
**Category:** Bikes
**Created:** [January 23, 2012, 6:45pm UTC](https://tarck.cc/t/tarck-arts-and-carfts-post-your-home-built-bikey-stuff/19528 "2012-01-23T18:45:20Z")
**Posts on this page:** 1
**Showing post:** 682

<div class="post-metadata">

### Author: ![Andrew\_Squirrel1](https://static.tarck.cc/letter_avatar_proxy/v4/letter/a/ed8c4c/32.png) [@Andrew\_Squirrel1](https://tarck.cc/u/Andrew_Squirrel1)
#### Post date: [May 30, 2018, 6:20pm UTC](https://tarck.cc/t/tarck-arts-and-carfts-post-your-home-built-bikey-stuff/19528/682 "2018-05-30T18:20:00Z")

</div>

Printed a version 4 of Jimmy’s Tubus Duo Lowrider pannier hook mount. Thanks for revising it Jimmy!  
I was taking off the set that he gifted me last year and there was a crack along the plastic grain at the corner of the hex nut.  
I was thinking of having them professionally printed by Shapeways to avoid any grain splits & better finish but the office 3D printer (0.01 resolution) did a pretty good job and in a colorway that matches my bike.  
[![](https://farm1.staticflickr.com/885/41555812695_5e36fd1c53_b.jpg)](https://flic.kr/p/26j9pke)  
[![](https://farm2.staticflickr.com/1725/41555812675_ab2134438b_b.jpg)](https://flic.kr/p/26j9pjT)

This was the last version:  
[![](https://farm1.staticflickr.com/714/31712424334_c3b71dbff4_b.jpg)](https://flic.kr/p/QjjsUN)

---

_[View the full topic](https://tarck.cc/t/tarck-arts-and-carfts-post-your-home-built-bikey-stuff/19528)._