Help me clean out my parts bin!

Cleaning out some junk to free up some cash for lathe restoration/tooling. Shipping included for >$60. Open to offers on everything.

Cassettes all used but low miles. I can clean them up before shipping.

I got pictures of everything just ask.

10s Cassettes:

11-28 Ultegra $30

11-32 XT SOLD

11-36 XT SOLD

11s Cassettes:

11-25 Red 1190 Powerdome $150

11-25 DA 9000 $150

Derailleurs:

SRAM GX 10s Type 2 short cage. Pretty beat but works fine clamp bolt stripped but I replaced with a longer bolt and nut. $20

Shimano XT 10s clutch. Used but good shape with a little grime. I think it’s short cage? It has a one up cage on it too. $40

SRAM Red 22 RD New take off. $200

Shimano DA 7800 FD and RD. NOS take offs, FD still has protective sticker on it. Short cage and 31.8 clamp on. $250

Shifters:

Red 10s unused take off. $300

Cranks:

Rotor 3D+ 175mm 130bcd 30mm spindle 53/39. Used, some scratches. $100

Chainrings:

Wolf Tooth N/W for Shimano 4 bolt road 42t used but low miles. $50

SRAM Force X-sync 44t 110bcd take off. $70

Ultegra 6800 53/39. Hardly used. $80

Handlebars:

3T Rotundo Team Stealth Carbon 40cm. Good used condition, tried going more narrow for racing a few years ago but too narrow for me. $150

Seatposts:

3T Palladio LTD 27.2 New but some small scratches. $80

Brakes:

Tektro R870 fancy lightweight brake set. Unused. $80

Tires:

2x Soma Cazadero 650b x 50mm. New $90

2x Maxxis Race TT 650b x 2.0. Used for like 50 miles, some leftover goo. $60

Forks:

Enve 1.0 road fork 1-1/8 straight. Full 300mm steerer, marks from a wheel though, don’t think it’s been ridden. $300

3T Focus Funda full carbon 1-1/8 to 1-1/4. Full 300mm steerer. $100

Cervelo P3 fork full carbon 1-1/8 straight. Tight clearances. Full 300mm steerer, couple paint chips. $100

Suntour XCM30 QR 29r 100mm travel. Like 160mm steerer. I think it’s a take off. $50.

Marinoni carbon/alu track fork 1-1/8. New, clear over carbon, not drilled. $100

1 Like

Got a pic of the rotor cranks? What kinda bb does it use?



You can put it in pretty much any frame. Just needs a 30mm BB and appropriate spacers. I have a new Rotor brand BB for PF30 I can throw in.

2 Likes

How stupid would it be to put this on my fixie with a Sugino ZEN chainring?

3 Likes

It would work if your ring is 130bcd. Chainline would be a bit off though.

i thought those were for your clydesdale

I’ll snag these.

1 Like

Thank you for saving me from buying them.

2 Likes

I live to serve. I will probably never need to buy a cassette for my poopbarner again, based on last year’s mileage (0).

1 Like

Is this a M786 dangler with the RAD cage?

I believe so, it was given to me at one point and I never had a use for it because I’m all drop bars.



1 Like