New & Interesting Bike Campenaerts

Any clue what the Q factor might work out to with those cranks?

Are there no 110x5 2x12-speed chainrings? Is that BCD just ded?

Yes

I wrote to wickwerks asking them to make some though. He said he’s working on it

1 Like

Why not just use 9, 10, or 11 speed chainrings? Afaik, 12 speed chains are the standard 11/128" width, so if your chainrings can pull that size of chain they should be able to do it with a 12-speed one.

(I use Biopace rings on all of my di2 machines, and wasn’t Biopace originally a 7-speed thing? In any case, I don’t have any trouble pulling an 11-speed chain with it.)

5 Likes

11s campy ring spacing is actually narrower than campy 12s by like a mm or two.

If that’s the case then that makes upgrading easy and I can keep my nerd cranks. I had some unpleasant grinding sensations with a Shimano 12-speed chain on an 11-speed sram narrow-wide 1x ring on my mountain bike, but maybe that’s only a concern with 1x stuff.

1 Like

iirc shimano’s 12s chain is special stuff

https://bike.shimano.com/en-US/information/news/shimano-hyperglide-.html

for hyperglide+ the inner plates look like they’re longer to increase contact with the chainring/cassette teeth. also probably means it will make too much contact with non HG+ kit

1 Like

From the looks of that page the primary change is the edges of the inner plates are more sculpted so that they won’t hang up during shifts? It might make them snuggle a little closer on old chainrings, but I can’t see how that’s too much contact?

This is really the only place it matters, match the chainring to the chain and match the chain to the cassette.

1 Like

That’s my secret for cheap 11s chainrings. I just buy 9-10s stuff.

3 Likes

So, is electrival the way everyone gets into roboshift the same way the $300 10sp rival groups were back in tha day?

i sure fucking hope so

At the same time I kind of am excited to see what shitshow happens like srma shiftergate

1 Like

Sram AXS 2x uses a chain with oversized rollers. So you’ll need special rings.

Rotor is offering them in round and oval for their 4 bolt Aldhu cranks. Only 48/35 so far though.

1 Like

There aren’t many options for large roller cranks. I did a ton of searching here. You can however use an eagle 12 chain with a regular chainring just fine.

1 Like

Right, I forgot about that!

can you use these cranks with an 11s chain?

From what I read you can use a chain with smaller rollers just fine.

I think that might only be for mullet builds.

Wait, so no eagle chain?

1 Like