Did you just ShartQ?

Bikes
28319

Is this the one with the weird matchy cinelli stem?

28320

Yeah it’s all silly matchy match.
Blue and yellow cinelli sesamo (not fitted currently, too flexible)
One blue, one yellow tektro bmx vee brake and lever
Blue and yellow flite
Yellow tioga DH bars
A yellow and a blue grip
Blue ATACS

7 Likes
28321

who makes an EBB for BSA 73mm for either DUB 29mm spindle or Praxis M30 spindle (30mm DS / 28mm NDS)?

28322

I don’t think anyone makes one since the bigger axle cuts down the throw of the EBB to a point where it doesn’t offer much adjustability.

2 Likes
28323

2 Likes
28324

Respectfully the ID of a BSA shell is like 33mm, not a whole lot of adjustment there after engaging the external BB parts

2 Likes
28325

Well this is interesting but only T47 c247d - First Components

28326

T47 shells are really big so it makes sense

2 Likes
28327

Literally a cm larger than bsa

1 Like
28328

I wonder why White Industries doesn’t sell a boost axle for the ENO. Probably too niche?

28329

The current eno relies on there being a big enough plain flat face on the inboard side of the dropout to accommodate the lobed part rotating and locking into position, right? It would be an interesting challenge to make an eno work with most boost dropouts.

2 Likes
28330

Maybe they didn’t want to fuck with UDH? The 12x142 version copy from White Ind says “the 12mm x 142mm Thru axle version uses a 12mm Thru axle (supplied by you, to fit your frame) to hold the hub in the frame.”

I guess you could run a 73 mm chainline with a 142 mm axle. You’d be kinda limited on tire size, but YOLO?

1 Like
28331

Sounds like I need a 200 dollar chain tensioner

28332

www.eehouse.org/fixin/why

28333

20260113_172903
20260113_1729034000×3000 4.11 MB

20260113_172931
20260113_1729314000×3000 4.54 MB

25 Likes
28334

Very nice !

28335

Multiple teases before finally showing the shark.

A tried and true formula that doesn’t disappoint!

1 Like
28336

Has anyone tried the new Stamp 1 flats or large/r Chester pedals?

28337

SICK!

respect

28338

I have a set, but I took them off my bike within 2 weeks because i scraped a rock on the side and that pedal started shifting around on the spindle after that. it shifted like at an angle, so the outer edge of the pedal felt like it moved when my weight landed on the pedal. i found this really annoying. i emailed CB about how to fix this and they just told me to take apart the pedal and perform a service, which i have not yet done.

i have a set of the gen 1s and they’ve been fine. but this experience with the gen 2 pedal left me not wanting to buy another set.

1 Like