Whatever cheapass bars are free or in your parts bin?
Need more info, need to match a ti chairpole?
Hmmmmm
Was that patois?
Yes is true, but poopbarning?
Iâm considering going back to 10sp. Whatâs that go to setup that doesnât suck a massive fuck again?
I was running
Shakes: ST-5700
Pieplate: 11-42t 10sp
Dangler: RD-M6000
Adaptor: wolftooth tanpan
Turdly shifting overall
Keep in mind I prefer a clutch dangler (maybe thatâs my problem)
Thatâs probably the 10-speed cable-under-the-bar-tape shakes you can blame for the turdly shiftnig. 2.3mm of cable pull per shift is not a lot. It worked okay for road bikes, but once you start getting everything gritty and grungy while poopbarning⌠nope.jpg
Thereâs a reason 10-speed MTB was put on a different cable pull.
Folx like to run that RX800 dangler you have with 11-40 cassettes (or 11-42 with a wolftooth thinggummy), but only with 1x. As youâve discovered, it doesnât have the capacity to run a big pie plate + 2x up front.
Unless you wanna run a tanpan + MTB dangler, I think you should just make peace with the fact that the you shouldnât crosschain 28/11 and live with it.
You could try the M6000 cage swap for shiggles - eyeballing the parts pdfs on si.shimano.com, it looks like a plausible swap. I say this as a person who is currently riding a 6400 Ultegra aero short cage on a Deore LX M560 derailleur body.
3 Likes
All this talk of 2000s alu race bikes reminded me of GVHBikes. It was a webstore run by a guy on the Oregon coast who imported all sorts of weird Euro frames⌠aluminum Cinellis, Viners, Looks, Mosers, etc.
Apparently someoneâs still running it and they still have the weird mis-mash of frame inventory:
http://www.gvhbikes.com/inventory.html
2 Likes
Them, red rose, Gita⌠I spent a fair bit of the start of the 2000âs poring over all those grainy, minimally legible websites.
1 Like
Red Rose was rad. Carrera were legit rad. Had customer years ago that had a custom steel and custom titanium one. Both were incredible.
M6000 GS has a chain capacity of 41 so you still wonât take up all the chain. for a difference of 2 teeth itâs not worth the cage swap unless you really like dithering.
1 Like
M6000 SGS btw
Most of those brands were out of Billato, right? I had an alu Cramerotti from them, full custom at a minimal upcharge
SGS is 43 so youâre still under specâŚ
To space out flatmount discs will any washer work? I have 160 rotors and adapters, but the pads still arenât clamping where they should be.
I think so.
Are you sure? Unless the rotor is kissing the top of the caliper itâs probably fine.
Iâve definitely seen some weird rotor shapes that at first appear to be wrong somehow but when I look inside the caliper the pad surface is all being contacted under braking.
Is it me or are Richey road logic frames expensive?
They are expensive.
I believe that they are among the only steel frame makers not using bog-standard OS tubing, hence the price
Fair point. Itâd be a contender in the 600-800$ costâŚ